- Roundtable - muug.ca

ReiserFS
by Tim J. Adams 30 Jul '02

30 Jul '02

I am looking at using ReiserFS on a RedHat Linux 7.3 installation as a data drive. Can anyone give me some info on the stability of this fs? Opinions on whether it is better/as good as ext3? Thanks. Tim Adams Manager, IS Client Services Pollard Banknote Limited 1499 Buffalo Place Winnipeg, Manitoba R3T 1L7 1-204-474-2323 Extension 273

1 0

Writing backups to Pioneer DVR-A04 DVD-RW writer.
by Scott Balneaves 12 Jul '02

12 Jul '02

Hello all, Here's one I can't figure out. Downloaded cdrtools-1.11.dvd.tar.gz, and compiled. Nice and clean worked like a champ. Wrote about 70 megs to the drive. Worked great. Here's the rub. I've got a 4.7 gig RW disk in the drive, and I'm trying to write 2.7 gigs or so of data. My output's below. Am I doing something wrong here? It says the data won't fit on the disk. Huh? Script started on Fri Jul 12 13:07:14 2002 [root@gandalf dump]# df -k Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda1 505605 290572 188929 61% / none 127568 0 127568 0% /dev/shm /dev/hda5 7408260 2638208 4393732 38% /usr /dev/hda2 4127108 94856 3822604 3% /var /dev/hdb1 19694836 2533728 16160664 14% /dump [root@gandalf dump]# ls -al total 2533729 drwxr-xr-x 3 root root 4096 Jul 12 13:07 . drwxr-xr-x 20 root root 1024 Jul 12 11:07 .. drwxr-xr-x 2 root root 16384 Jul 12 11:06 lost+found -rw-r--r-- 1 root root 2591981568 Jul 12 11:16 usrdump.iso [root@gandalf dump]# /opt/schily/bin/cdrecord -v -dao dev=0,0,0 -data usrdump.isoo Cdrecord 1.11a08 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.20 Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-104 ' Revision : '1.20' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1638400 = 1600 KB FIFO size : 4194304 = 4096 KB Track 01: data 2471 MB Total size: 2838 MB (281:14.88) = 1265616 sectors Lout start: 2839 MB (281:16/66) = 1265616 sectors Current Secsize: 2048 Trying to clear drive status. /opt/schily/bin/cdrecord: Drive needs to reload the media to return to proper status. ATIP start of lead in: -150 (00:00/00) Disk type: unknown Manuf. index: -1 Manufacturer: unknown (not in table) /opt/schily/bin/cdrecord: Data will not fit on any disk. /opt/schily/bin/cdrecord: Cannot write CD's >= 100 minutes. [root@gandalf dump]# exit Script done on Fri Jul 12 13:09:10 2002 Weeeiiird. Any hints? Redhat 7.2 with current set of patches hosts the drive. Scott -- Scott L. Balneaves | "The mark of an immature man is that he wants Unix Administrator | to die nobly for a cause, while the mark of a Legal Aid Manitoba | mature man is that he wants to live humbly sbalneav(a)legalaid.mb.ca | for one." -- William Stekel

1 0

Re: Contents of Roundtable digest...
by Quinn Wilson 12 Jul '02

12 Jul '02

Is there anything funny about the files in question? Do you have permissions on them? Are they regular files or special devices? Can you list them here? ~ ~ :qwilson@midworld.org - Lunky C++; Lunky do {;} > > Message: 1 > Date: Thu, 11 Jul 2002 08:38:21 -0700 > From: Brock Wolfe <obwolfe(a)shaw.ca> > To: "roundtable(a)muug.mb.ca" <roundtable(a)muug.mb.ca> > Reply-to: Wolfe <obwolfe(a)shaw.ca> > Subject: [RndTbl] stuck in tar > > After cloning a hard disk I discovvered missing files on the target hard > drive. After looking around it seems that tar did not include files from > multiple locations on the source hard drive. In a specific case it failed > to include 6 files from the /sbin directory. > The tar command used (login as root) on the source disk ( RH 7.1, ext2 ) > was : > > tar cvplf /var/tmp/root.tar / > > Repeating this exercise on a (RH 6.2 ext2) box did not duplicate the > problem of missing 6 files. > > Repeating the following command on the orginal source disk (RH7.1 ext2) > reproduced the problem of missing 6 files.. > > tar cvplf /var/tmp/sbin.tar /sbin > > I would just move these 6 files over by other means but there are too many > files in other partitions missing to make this practical. > > Any ideas on the source of the problem? > > > > > > > Brock Wolfe > ___________________________________________________________________ > "Obstacles are those frightful things you see when you take your eyes off > your goal." > --- Henry Ford > ___________________________________________________________________

1 0

RE: stuck in tar
by Brock Wolfe 11 Jul '02

11 Jul '02

Well after more digging found that the files not included in tar archive were tied to hard links. Displayed by find command: find . -type f \! -links 1 -prinff "%i %n %p\n" | sort -n Now I need a solution to cloning a partition that clones hard links correctly. - tried drivecopy ( died on CRC error ) - dd incorrectly writes one less sector than read on partions with odd numbered sectors Brock Wolfe ___________________________________________________________________ "Obstacles are those frightful things you see when you take your eyes off your goal." --- Henry Ford ___________________________________________________________________

3 2

stuck in tar
by Brock Wolfe 11 Jul '02

11 Jul '02

After cloning a hard disk I discovvered missing files on the target hard drive. After looking around it seems that tar did not include files from multiple locations on the source hard drive. In a specific case it failed to include 6 files from the /sbin directory. The tar command used (login as root) on the source disk ( RH 7.1, ext2 ) was : tar cvplf /var/tmp/root.tar / Repeating this exercise on a (RH 6.2 ext2) box did not duplicate the problem of missing 6 files. Repeating the following command on the orginal source disk (RH7.1 ext2) reproduced the problem of missing 6 files.. tar cvplf /var/tmp/sbin.tar /sbin I would just move these 6 files over by other means but there are too many files in other partitions missing to make this practical. Any ideas on the source of the problem? Brock Wolfe ___________________________________________________________________ "Obstacles are those frightful things you see when you take your eyes off your goal." --- Henry Ford ___________________________________________________________________

1 0

Canadian Linux User Exchange reorganization
by bill traynor 10 Jul '02

10 Jul '02

Announcement and formal Invitation to discussions: On Tuesday, July 9, 2002 discussion will begin regarding the definition, organization and relaunch of the Canadian Linux Users Exchange (CLUE). Discussions will take place on the admin(a)linux.ca mailing list exclusively. Please see http://www.linux.ca/lists/ to subscribe. What CLUE is, What CLUE does, Why CLUE exists will be discussed. Thanks Bill Traynor

1 1

(no subject)
by Nguyen, Tien 09 Jul '02

09 Jul '02

hi gurus, looking at a unix system, x display. is it possible to takeover control of the mouse cursor on a system level? ie. instead of having to move the mouse to move the cursor, is it possible write a program which moves the cursor automatically ? and that movement is not restricted to having the cursor inside its own window? i am sure there's got to be a low level function call to move the mouse in response to mouse-device movement. just not sure if it's accessable to programmer. any help is greately appreciated regards tien

3 2

Canadian Linux Users Exchange reorganization discussions to begin
by bill traynor 09 Jul '02

09 Jul '02

Announcement and formal Invitation to discussions: On Tuesday, July 9, 2002 discussion will begin regarding the definition, organization and relaunch of the Canadian Linux Users Exchange (CLUE). Discussions will take place on the admin(a)linux.ca mailing list exclusively. Please see http://www.linux.ca/lists/ to subscribe. What CLUE is, What CLUE does, Why CLUE exists will be discussed. Thanks Bill Traynor

1 0

Re: [RndTbl] SCSI emulation returns... burner works
by gedetil＠cs.umanitoba.ca 08 Jul '02

08 Jul '02

According to millward: > In grub.conf I added hdc=ide-scsi > and Red Hat automatically updated fstab during boot. > cdrecord -scanbus showed a device at 0,0,0 > I had prepared a file in /usr/LTSP using > mkisofs -r -J -o /usr/LTSP/ltsp.iso /usr/LTSP > ( got this from an English Linux magazine. > I can never understand man documents ) > So I tried to burn a CD using > cdrecord -v dev=0,0,0 speed=4 /usr/LTSP/ltsp.iso > and it looked good. I booted into ms windows and > the CD is readable under DOS too. > Thanks for all the advice. > I would never have figured this out on my own. > Strange that in 7.2, grub didn't need the statement > hdc=ide-scsi, but I quess things change all the time. > Thanks again! Actually, grub itself doesn't need any of that, it simply passes it on to the Linux kernel. :) But the kernel would have needed that all along. I suspect it was getting it from someplace else before your 7.3 upgrade. Since you seemed to have an appropriate append statement in /etc/lilo.conf, I suspect you had been using LILO previously, and just switched to grub in this latest upgrade. Since grub is the default selection, it's easy to do that without even realising it. -- Gilbert E. Detillieux E-mail: <gedetil(a)cs.umanitoba.ca> Dept. of Computer Science Web: http://www.cs.umanitoba.ca/~gedetil/ University of Manitoba Phone: (204)474-8161 Winnipeg, MB, CANADA R3T 2N2 Fax: (204)474-7609

1 0

SCSI emulation returns... burner works
by millward 08 Jul '02

08 Jul '02

In grub.conf I added hdc=ide-scsi and Red Hat automatically updated fstab during boot. cdrecord -scanbus showed a device at 0,0,0 I had prepared a file in /usr/LTSP using mkisofs -r -J -o /usr/LTSP/ltsp.iso /usr/LTSP ( got this from an English Linux magazine. I can never understand man documents ) So I tried to burn a CD using cdrecord -v dev=0,0,0 speed=4 /usr/LTSP/ltsp.iso and it looked good. I booted into ms windows and the CD is readable under DOS too. Thanks for all the advice. I would never have figured this out on my own. Strange that in 7.2, grub didn't need the statement hdc=ide-scsi, but I quess things change all the time. Thanks again!

1 0